Lighted Incandescent Mirror 20W Replacement Bulb
model: RP34B
  • Replacement bulbs #RP34B can be used on Conair Lighted Incandescent Mirrors BE151T, BE71CT, BE47X, and BE47BR
  • To replace bulb: CAUTION: Turn off power and unplug mirror. Allow mirror to cool at least 3 minutes before replacing bulb. If necessary, see the mirror instruction booklet first.

  1. Unscrew screws from opposite sides of the mirror housing near the rotating hinges
  2. Carefully lift off the top half of the housing from the bottom half that is affixed to the arm
  3. Unscrew the old bulb and replace with the new one
  4. Carefully replace the top housing half after locating and aligning the screw holes to the bottom half. If the holes don't line up, turn top half of mirror 180 degrees.
  5. Insert two screws back into screw holes and tighten with a screwdriver. Do not over-tighten. 
Suggested Retail: $7.99
Photo: Lighted Incandescent Mirror 20W Replacement Bulb
Quick Tips

Chilly winter winds can make skin dry, cracked and sore. For a soothing experience, put a little oatmeal in your bath water.

More Tips and Techniques
   Next Product [>]   1 of 2 shown  
Email Signup
Select the topics you would like to receive emails about:
Please enter your email address:  
Unsubscribe - before you go
, you can narrow down your options and we will ONLY send you emails that pertain to that particular category.
You have been unsubscribed
We're sorry to see you leave. Goodbye!
Your lists have been changed
Here is a confirmation of the list you have subscribed to: